Valid JN0-637 Exam Tips & JN0-637 Exam Learning

Blog Article

Tags: Valid JN0-637 Exam Tips, JN0-637 Exam Learning, Exam JN0-637 Overview, JN0-637 Pdf Files, JN0-637 Books PDF

Revision of your JN0-637 exam learning is as essential as the preparation. For that purpose, JN0-637 exam dumps contains specially created real exam like practice questions and answers. They are in fact meant to provide you the opportunity to revise your learning and overcome your JN0-637 Exam fear by repeating the practice tests as many times as you can. Preparation for JN0-637 exam using our JN0-637 exam materials are sure to help you obtain your targeted percentage too.

Juniper JN0-637 Exam Syllabus Topics:

Topic	Details
Topic 1	Automated Threat Mitigation: This topic covers Automated Threat Mitigation concepts and emphasizes implementing and managing threat mitigation strategies.
Topic 2	Layer 2 Security: It covers Layer 2 Security concepts and requires candidates to configure or monitor related scenarios.
Topic 3	Multinode High Availability (HA): In this topic, aspiring networking professionals get knowledge about multinode HA concepts. To pass the exam, candidates must learn to configure or monitor HA systems.
Topic 4	Advanced IPsec VPNs: Focusing on networking professionals, this part covers advanced IPsec VPN concepts and requires candidates to demonstrate their skills in real-world applications.
Topic 5	Advanced Network Address Translation (NAT): This section evaluates networking professionals' expertise in advanced NAT functionalities and their ability to manage complex NAT scenarios.

>> Valid JN0-637 Exam Tips <<

Excellent Valid JN0-637 Exam Tips Covers the Entire Syllabus of JN0-637

In order to give the best JN0-637 study braindumps to our worthy customers, we also focus on the customer's user experience. Our staff provides you with the smoothest system. If you have encountered some problems while using JN0-637 Practice Guide, you can also get our timely help as our service are working 24/7 online. Of course, our JN0-637 exam questions are advancing with the times and you will get the latest information.

Juniper Security, Professional (JNCIP-SEC) Sample Questions (Q50-Q55):

NEW QUESTION # 50
Exhibit:

You are troubleshooting a firewall filter shown in the exhibit that is intended to log all traffic and block only inbound telnet traffic on interface ge-0/0/3.
How should you modify the configuration to fulfill the requirements?

A. Delete the log-all term
B. Modify the log-all term to add the next term action
C. Add a term before the log-all term that blocks Telnet
D. Apply a firewall filter to the loopback interface that blocks Telnet traffic

Answer: B

Explanation:
To modify the configuration to fulfill the requirements, you need to modify the log-all term to add the next term action.
The other options are incorrect because:
B) Deleting the log-all term would prevent logging all traffic, which is one of the requirements. The log-all term matches all traffic from any source address and logs it to the system log file1.
C) Adding a term before the log-all term that blocks Telnet would also prevent logging all traffic, because the log-all term would never be reached. The firewall filter evaluates the terms in sequential order and applies the first matching term. If a term before the log-all term blocks Telnet, then the log-all term would not match any traffic and no logging would occur2.
D) Applying a firewall filter to the loopback interface that blocks Telnet traffic would not block inbound Telnet traffic on interface ge-0/0/3, which is another requirement. The loopback interface is a logical interface that is always up and reachable. It is used for routing and management purposes, not for filtering traffic on physical interfaces3.
Therefore, the correct answer is A. You need to modify the log-all term to add the next term action. The next term action instructs the firewall filter to continue evaluating the subsequent terms after matching the current term. This way, the log-all term would log all traffic and then proceed to the block-telnet term, which would block only inbound Telnet traffic on interface ge-0/0/34. To modify the log-all term to add the next term action, you need to perform the following steps:
Enter the configuration mode: user@host> configure
Navigate to the firewall filter hierarchy: user@host# edit firewall family inet filter block-telnet Add the next term action to the log-all term: user@host# set term log-all then next term Commit the changes: user@host# commit Reference: log (Firewall Filter Action) Firewall Filter Configuration Overview loopback (Interfaces) next term (Firewall Filter Action)

NEW QUESTION # 51
Exhibit

You have recently configured Adaptive Threat Profiling and notice 20 IP address entries in the monitoring section of the Juniper ATP Cloud portal that do not match the number of entries locally on the SRX Series device, as shown in the exhibit.
What is the correct action to solve this problem on the SRX device?

A. Refresh the feed in ATP Cloud.
B. Force a manual download of the Proxy__Nodes feed.
C. You must configure the DAE in a security policy on the SRX device.
D. Flush the DNS cache on the SRX device.

Answer: D

NEW QUESTION # 52
Click the Exhibit button.

Referring to the exhibit, which three actions do you need to take to isolate the hosts at the switch port level if they become infected with malware? (Choose three.)

A. Enroll the SRX Series device with Juniper ATP Cloud.
B. Deploy Juniper Secure Analytics.
C. Use a third-party connector.
D. Configure AppTrack on the SRX Series device.
E. Deploy Security Director with Policy Enforcer.

Answer: A,C,E

Explanation:
A: Enroll the SRX Series device with Juniper ATP Cloud. This is essential for the SRX to receive threat intelligence from ATP Cloud, enabling it to identify infected hosts and take action.
B: Use a third-party connector. In this specific scenario, a third-party connector is required to integrate the SRX with the third-party switch. While Juniper has native integration for its EX switches, a connector is necessary to communicate with and manage the third-party switch.
C: Deploy Security Director with Policy Enforcer. Security Director orchestrates the automated response, and Policy Enforcer translates the policies into device-specific commands for the SRX and the third-party switch (via the connector).

NEW QUESTION # 53
Exhibit:

Referring to the exhibit, which two statements are correct? (Choose two.)

A. The device cannot pass Layer 2 and Layer 3 traffic at the same time.
B. The device can pass Layer 2 and Layer 3 traffic at the same time.
C. You can secure inter-VLAN traffic with a security policy on this device.
D. You cannot secure intra-VLAN traffic with a security policy on this device.

Answer: B,C

Explanation:
The exhibit provides information about an SRX Series device operating intransparent mode(Layer 2) and Layer 3routing at the same time. Let's break down the correct answers:
* Explanation of Answer B (Secure Inter-VLAN Traffic with a Security Policy):
* The SRX device can secureinter-VLAN trafficbecause it supports security policies for Layer 3 traffic between different VLANs. In this case, traffic moving between different VLANs (i.e., Layer 3 traffic) can be processed and controlled using security policies.
* Explanation of Answer C (Pass Layer 2 and Layer 3 Traffic Simultaneously):
* The SRX device can handle both Layer 2 and Layer 3 traffic simultaneously. Inmixed mode, the device is capable of switching traffic at Layer 2 (intra-VLAN) while also routing traffic at Layer
3 (inter-VLAN). This is evident from the global configuration showingtransparent bridge mode and Layer 3 interfaces.
Juniper Security Reference:
* Mixed Mode Overview: Juniper SRX devices in mixed mode can operate as both a Layer 2 switch and a Layer 3 router, allowing it to pass traffic at both layers simultaneously. Reference: Juniper Mixed Mode Documentation.

NEW QUESTION # 54
You are asked to connect two hosts that are directly connected to an SRX Series device. The traffic should flow unchanged as it passes through the SRX, and routing or switch lookups should not be performed. However, the traffic should still be subjected to security policy checks.
What will provide this functionality?

A. Secure wire
B. Mixed mode
C. MACsec
D. Transparent mode

Answer: A

Explanation:
Secure wire mode on SRX devices allows traffic to flow transparently through the firewall without being routed or switched, while still applying security policies. This is ideal for scenarios where traffic inspection is required without altering the traffic path or performing additional routing decisions.
In this scenario, you want traffic to pass through the SRX unchanged (without routing or switching lookups) but still be subject to security policy checks. The best solution for this requirement is Secure Wire.
Secure Wire allows traffic to flow through the SRX without any Layer 3 routing or Layer 2 switching decisions. It effectively bridges two interfaces at Layer 2 while still applying security policies. This ensures that traffic remains unchanged, while security policies (such as firewall rules) can still be enforced.
This is an ideal solution when you need the SRX to act as a "bump in the wire" for security enforcement without changing the traffic or performing complex network lookups.

NEW QUESTION # 55
......

ExamPrepAway provides the JN0-637 Exam Questions and answers guide in PDF format, making it simple to download and use on any device. You can study at your own pace and convenience with the Juniper JN0-637 PDF Questions, without having to attend any in-person seminars. This means you may study for the JN0-637 exam from the comfort of your own home whenever you want.

JN0-637 Exam Learning: https://www.examprepaway.com/Juniper/braindumps.JN0-637.ete.file.html

Report this page

VALID JN0-637 EXAM TIPS & JN0-637 EXAM LEARNING

Valid JN0-637 Exam Tips & JN0-637 Exam Learning